Whirlpool Dryer Power Cord Replacement

WhirlpoolWhirlpool DryerEasy⏱ 15 - 30 minutes

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

Use this guide to change the power cord on your Whirlpool Dryer. This guide is intended for electric dryers. Sometimes the power cord can get pinched or damaged and need to be replaced, and this guide will get you through it. This guide will work for most Whirlpool electric dryers. This guide is written with a model WED87HED dryer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

🧰 Tools

5/16" Nut Driver
1/4" Nut Driver
Phillips #2 Screwdriver
6-in-1 Screwdriver

ШагиSteps

Safety Precautions

Before you begin your repair, unplug your dryer.
Your power cord may have four prongs rather than three. The additional prong is a ground connection.

Unfasten the cover plate

Remove the cover plate screw.

Remove the cover plate

Remove the cover plate.

Disconnect the cord

Remove the screws securing the cord cables.
Mark the cables with a permanent marker if needed and take a picture or draw a diagram.

Remove the cord

Pull the cord carefully down through the round hole.
Make sure you replace the connections correctly when you reassemble.

To reassemble your device, follow these instructions in reverse order. Repair didn’t go as planned? Ask our Answers community for help.

«Whirlpool Dryer Power Cord Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →