Testing a Dishwasher Inlet Valve
Washing MachineModerate⏱ No estimate
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
This guide shows you how to access the inlet valve of a dishwasher and test its functionality with an ohmmeter.
ШагиSteps
1
Laying it down
- Lay the dishwasher on its side.
2
Step 2
- Unscrew and remove the panel located under the dishwasher.
3
Step 3
- Locate the solenoid valve and disconnect the water inlet hose.
4
Step 4
- Unclip the rear assembly.
5
Step 5
- Clean the solenoid valve filter.
6
Step 6
- Test the solenoid valve with an ohmmeter.
7
Step 7
- Reinstall the block and the solenoid valve.
8
Step 8
- Replace the plate and stand the device upright.
To reassemble your device, follow the instructions in reverse order.
«Testing a Dishwasher Inlet Valve» — автор CLAIN malaume, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →