LG Front Load Washing Machine Drain Filter Replacement
LGLG Front Load Washing MachineEasy⏱ 5 - 10 minutes
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
Use this guide to replace or clean the drain filter in your LG front load washing machine..
The drain filter collects large debris, like loose change, that might be stuck to your clothes. If your washing machine isn't removing this debris, or if your tub is not draining properly, then your filter may be broken or clogged.
This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
ШагиSteps
1
Unclip the filter door
- Unclip the filter door from its slot in the chassis and let it rest on the ground.
2
Drain the drain filter hose
- Place a bowl next to the device.
- Pull the drain filter hose out of its slot in the chassis enough to lay over the bowl.
- Remove the plug at the end of the drain filter hose to release excess water into the bowl.
3
Remove the drain filter
- Twist the drain filter counterclockwise until it's fully disconnected from the chassis.
- Remove the drain filter.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
«LG Front Load Washing Machine Drain Filter Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →