LG Front Load Washing Machine Detergent Bellows Replacement

LGLG Front Load Washing MachineModerate⏱ 45 minutes - 1 hour

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

Use this guide to replace the detergent bellows or detergent hose in your LG front load washing machine. The detergent bellows connects the detergent dispenser assembly to the tub. This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

Сначала выполнить:Do these first:

How to Remove the Top Panel in Your LG Front Load Washing Machine

🧰 Tools

Phillips #2 Screwdriver
Slip Joint Pliers
Masking Tape
Magnetic Mat Replacement Pen

ШагиSteps

Step 1

Before you begin your repair, perform the following:
Turn off the main water supply
Unplug your washer
Disconnect all water connections at the rear of your washer

Unfasten the top panel

Remove the screw(s) securing the top panel brackets to the back panel.
You don't need to remove the screws securing the brackets to the top panel.

Remove the top panel

Slide the top panel towards the rear of the device to disconnect its clips.

Step 4

Tilt the top panel upward to completely disconnect it from the chassis.
Remove the top panel.

Disconnect the control panel

Disconnect the connectors attached to the control panel.
Always grip cables by their connectors and not the wires themselves.

Unclip the control panel cable

Unclip any connections the control panel cable has to the chassis or other components.

Detergent dispenser hose information

To prevent confusion, label each detergent hose and its corresponding dispenser connection.
You can use masking tape or mark the components themselves.

Step 8

Use slip joint pliers to pinch the detergent dispenser hose clamp and pull it away from the assembly.

Step 9

Use slip joint pliers to gently rotate the detergent dispenser hose back and forth around its connection and loosen it.

Step 10

Pull the detergent dispenser hose straight off its connection on the assembly.
Repeat the loosening and removal procedure for each hose.

Disconnect the dispenser

Loosen any fasteners securing the bellows to the detergent dispenser.
Pull the bellows straight off its connection on the dispenser to disconnect it.

Disconnect the bellows

Loosen the fastener securing the bellows to the drum.
Pull the bellows straight up from the drum to disconnect it.

Remove the bellows

You're now left with the bellows.

To reassemble your device, follow these instructions in reverse order. Take your e-waste to an R2 or e-Stewards certified recycler. Repair didn’t go as planned? Ask our Answers community for help.

«LG Front Load Washing Machine Detergent Bellows Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →