Beko DHR73431W Capacitor Replacement

BekoBeko DHR73431WEasy⏱ 5 - 20 minutes

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

This guide covers replacing a capacitor on a Beko DHR73431W Heat Pump Dryer. This can fix problems with the barrel not turning. Since Capacitors are dangerous, if you Don't already know how to work with them safely, please consider this Guide: "How to Safely Discharge a Capacitor" a prerequisite to this one.

🧰 Tools

Phillips #2 Screwdriver

⚙️ Parts

beko tumble dryer 8uf capacitor

ШагиSteps

Step 1

Remove the two Phillips 02 (cross-head) screws securing the lid
Capacitors store dangerous levels of electrical current, they must be discharged before handling. To begin UNPLUG the device from the mains, and let it sit for a few hours Make sure you let the power drain before opening BEWARE: it is possible for capacitors to store a life-threatening charge for months or years.
Before commencing work inside or attempting to handle the capacitor, very cautiously short the terminals to ground and dissipate any residual charge.

Step 2

Unscrew and remove the five Phillips 02 cross-head screws of the side panel
Remove the single Phillips 02 cross-head screw on the bottom
Remove the two Phillips 21 cross-head screws from the top

Step 3

WARNING! Discharge any residual current from the capacitor before continuing.
Remove the single Phillips 02 cross-head screw for the capacitor labeled with a large '8'.
Unplug the two connectors at the base of the capacitor

To continue, put in your new capacitor then follow the steps in reverse.

«Beko DHR73431W Capacitor Replacement» — автор Daniel Grey, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →