Kenmore Series 110 Dryer Start Switch Replacement

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

ШагиSteps

1

Remove control console screws

• Before you begin, be sure to unplug the dryer.
• Remove the screws the hold down the control console. There is one screw on each side. The screws are #1 philips.

2

Open the control panel

• Slide the control panel forward in order to expose the control panel controls and wiring.
• Note the tabs slide into the holes.

3

Remove the start switch

• The start switch is in the right side of the exposed control panel.
• Remove the two wire clips from the tabs on the switch. Note black on top white/red on the bottom.
• Lift the tab on the lower part of the switch and turn to the right to remove.