Kenmore 110 Series Washing Machine Water Pump Replacement
KenmoreKenmore 110 Series Washing MachineModerate⏱ 15 - 30 minutes
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.
🧰 Tools
- 1/4" Socket
- Socket Wrench
ШагиSteps
1
Step 1
- Carefully lay washing machine on its back.
2
Step 2
- Carefully remove both wire harnesses connected to the pump.
- Squeeze and pull back hose clamp.
- Twist drain hose off of pump.
- Using a 1/4" socket wrench, remove the three mounting screws.
- Pull the pump out of place.
To reassemble your device, follow these instructions in reverse order.
«Kenmore 110 Series Washing Machine Water Pump Replacement» — автор Robert Trout, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →