Kenmore 110 Series Washing Machine Lid Switch Replacement

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

ШагиSteps

1

Step 1

• To avoid risk of electric shock, unplug the washing machine.
• Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.
• Lifting from the rear, remove the top panel.
• Set the top panel on its rear face, with its underside facing you.
• The top panel will still be connected to the washer by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

2

Step 2

• Using a 5/16" socket wrench or hand wrench, remove the two screws from the component cover.
• Gripping from the bottom, pull the component cover out of the washer.

3

Step 3

• Carefully unplug the two wires connected to the lid switch.
• Remove the two Phillips screws securing the bracket.
• Remove the green ground wire.
• With a screwdriver, remove the single screw connecting the lid switch to the bracket.